Shielden 1P Single Vertical Horizontal Single Axis Solar Tracking Bracket System

Intelligent Sunshine series tracking systems all use large-section spindles and columns to improve system stability and reliability.

Product model:Shielden 1P
Product brand:Shielden
Material: carbon steel
Applicable components: fully adapted to 210 silicon wafer solar panels

Advantages of Shielden 1P Solar Tracking Photovoltaic Mounting System:

1. Projects suitable for various working conditions;
2. Compared with the 2P system, the load on the structure is relatively small, and the requirements for foundation design are relatively low;
3. Compared with the 2P system, the basic quantity will increase by about 58%;
4. Compared with the 2P system, the bracket cost is slightly lower by about 6%;
5. Compared with the 2P system, the single row length is relatively long and the terrain and slope requirements are relatively high;
6. Compared with the 2P system, the height is relatively low and the installation is relatively convenient.

Structural parameters

System type: Single vertical and horizontal single-axis tracking system
Single row module power: 54KWp (take 600W module as an example)
Number of components in a single row: 90 pieces (1Px90)
Tracking range:±60°
Tracking accuracy:±1°
Number of drivers: 1 unit
Structural materials: hot-dip galvanized steel, aluminized magnesium zinc steel
Foundation type: cement cast-in-place pile, static pressure pile, PHC prefabricated pipe pile
Number of pile foundations/MW: 205/MW (taking 600W modules as an example)
String design: adapt to various string numbers

Electrical control

Tracking algorithm: astronomical algorithm + closed loop (AI)
Controller: MCU (single chip microcomputer)
Communication method: RS485 wired or wireless (LoRa/Zigbee)
Drive type: Rotary reducer
Motor: 24V DC140-160W DC motor
Power supply method: AC power supply/string power supply
Shadow Retrospect: Yes
Manual control mode: Yes

Protective function

High wind protection mode: ≥18m/s
Return to normal at night: Yes
Motor overheating protection: Yes
Motor overload protection: Yes
System fault self-diagnosis: equipped
Protection recovery time: 5--6 minutes

Environment and other

Wind load: set according to project
Applicable ambient temperature: -30℃-60℃
Environmental pollution level: C5
Slope adaptability: 10%~20% from north to south, unlimited from east to west
Special tools: no need
Standard: GB, ASCE, BSEN, AS, etc. (according to the project)
Warranty: 5 years for drive and electronic control, 10 years for structure